Kingston FURY Beast DDR5-6000 1x32GB CL30 vs Lexar ARES RGB DDR5-6000 2x16GB
Kingston FURY Beast DDR5-6000 1x32GB CL30 and Lexar ARES RGB DDR5-6000 2x16GB arrive at the same true latency, 10.00 ns apiece. At least one of the two has no tracked price right now, so what follows compares specifications rather than cost.
| Specification | KingstonFURY Beast DDR5-6000 1x32GB CL30 | LexarARES RGB DDR5-6000 2x16GB |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 6000 | 6000 |
| 30 | 30 | |
| True latency (ns) | 10.00 | 10.00 |
| Current best price | $947.56at Amazon.ca · captured 2026-09-13 | — |
| Price per GB | $29.61 | — |
No tracked price for Lexar ARES RGB DDR5-6000 2x16GB at the moment. Nothing has been captured for it that this page will stand behind, so its price cells stay empty rather than carrying a stale figure.
Kingston FURY Beast DDR5-6000 1x32GB CL30 vs Lexar ARES RGB DDR5-6000 2x16GB in detail
True latency
Both kits land on 10.00 ns. Neither spec sheet differs from the other on the two figures that decide it — 6000 MT/s at CL30 on each side — so the reconciled result is identical rather than merely close.
Transfer rate
Both kits are rated 6000 MT/s, which is 48000 MB/s per module, and both are published at CL30. Those are the two figures the true latency above is computed from, so it comes out the same for each.
Kit layout
Kingston FURY Beast DDR5-6000 1x32GB CL30 ships as 2 × 16GB and Lexar ARES RGB DDR5-6000 2x16GB ships as 2 × 16GB — the same number of sticks on both sides, so they populate a board's slots the same way.
Lighting and timings
On lighting: Kingston FURY Beast DDR5-6000 1x32GB CL30 is published with no RGB lighting, and Lexar ARES RGB DDR5-6000 2x16GB has RGB lighting. On the full timing tuple — the numbers after CAS — Kingston FURY Beast DDR5-6000 1x32GB CL30 is 30-36-36, and Lexar ARES RGB DDR5-6000 2x16GB is 30-38-38-76.
Which to buy
No buying answer is possible while at least one of the two has no tracked price. The specifications do not decide it either — both land on 10.00 ns of true latency — so the choice rests on what the sections above show.
Common questions about this pair
- Is Kingston FURY Beast DDR5-6000 1x32GB CL30 faster than Lexar ARES RGB DDR5-6000 2x16GB?
- Neither is. Both work out at 10.00 ns of true latency — Kingston FURY Beast DDR5-6000 1x32GB CL30 runs 6000 MT/s at CL30, Lexar ARES RGB DDR5-6000 2x16GB runs 6000 MT/s at CL30, and those two land in the same place.
- Which of these two should I buy?
- No buying answer is possible while at least one of the two has no tracked price. The specifications do not decide it either — both land on 10.00 ns of true latency — so the choice rests on what the sections above show.