ADATA XPG Lancer Blade DDR5-6000 2x16GB vs Kingston FURY Beast DDR5-6000 1x32GB CL30
ADATA XPG Lancer Blade DDR5-6000 2x16GB and Kingston FURY Beast DDR5-6000 1x32GB CL30 arrive at the same true latency, 10.00 ns apiece. The latency is level, and Kingston FURY Beast DDR5-6000 1x32GB CL30 is the one tracked at the lower price, so cost is the only difference.
| Specification | ADATAXPG Lancer Blade DDR5-6000 2x16GB | KingstonFURY Beast DDR5-6000 1x32GB CL30 |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 6000 | 6000 |
| 30 | 30 | |
| True latency (ns) | 10.00 | 10.00 |
| Current best price | 612,17 €at Amazon.de · captured 2026-09-13 | 172,05 €betterat Amazon.de · captured 2026-09-13 |
| Price per GB | 19,13 € | 5,38 €better |
ADATA XPG Lancer Blade DDR5-6000 2x16GB vs Kingston FURY Beast DDR5-6000 1x32GB CL30 in detail
True latency
Both kits land on 10.00 ns. Neither spec sheet differs from the other on the two figures that decide it — 6000 MT/s at CL30 on each side — so the reconciled result is identical rather than merely close.
Transfer rate
Both kits are rated 6000 MT/s, which is 48000 MB/s per module, and both are published at CL30. Those are the two figures the true latency above is computed from, so it comes out the same for each.
Price and tracked history
ADATA XPG Lancer Blade DDR5-6000 2x16GB is tracked at 612,17 €, or 19,13 € per gigabyte; Kingston FURY Beast DDR5-6000 1x32GB CL30 at 172,05 €, or 5,38 €. At the same 32GB, that puts Kingston FURY Beast DDR5-6000 1x32GB CL30 440,12 € less than ADATA XPG Lancer Blade DDR5-6000 2x16GB. Kingston FURY Beast DDR5-6000 1x32GB CL30's 172,05 € sits 69% under its own 90-day median.
Kit layout
ADATA XPG Lancer Blade DDR5-6000 2x16GB ships as 2 × 16GB and Kingston FURY Beast DDR5-6000 1x32GB CL30 ships as 2 × 16GB — the same number of sticks on both sides, so they populate a board's slots the same way.
Voltage
ADATA XPG Lancer Blade DDR5-6000 2x16GB is specified at 1.35 V and Kingston FURY Beast DDR5-6000 1x32GB CL30 at 1.4 V. That is the supply each kit's published profile requests from the board.
Lighting and timings
On lighting: ADATA XPG Lancer Blade DDR5-6000 2x16GB is published with no RGB lighting, and Kingston FURY Beast DDR5-6000 1x32GB CL30 is published with no RGB lighting. On the full timing tuple — the numbers after CAS — ADATA XPG Lancer Blade DDR5-6000 2x16GB publishes none, and Kingston FURY Beast DDR5-6000 1x32GB CL30 is 30-36-36.
Which to buy
At the prices tracked here Kingston FURY Beast DDR5-6000 1x32GB CL30 undercuts ADATA XPG Lancer Blade DDR5-6000 2x16GB, and the two are level on true latency at 10.00 ns. What that separation buys is a lower price, not a quicker kit — nothing on this page says it will feel any different in use.
Common questions about this pair
- Is ADATA XPG Lancer Blade DDR5-6000 2x16GB faster than Kingston FURY Beast DDR5-6000 1x32GB CL30?
- Neither is. Both work out at 10.00 ns of true latency — ADATA XPG Lancer Blade DDR5-6000 2x16GB runs 6000 MT/s at CL30, Kingston FURY Beast DDR5-6000 1x32GB CL30 runs 6000 MT/s at CL30, and those two land in the same place.
- Which one costs less?
- Kingston FURY Beast DDR5-6000 1x32GB CL30, tracked at 172,05 € against 612,17 €: 440,12 € between them at the same 32GB.
- Which of these two should I buy?
- At the prices tracked here Kingston FURY Beast DDR5-6000 1x32GB CL30 undercuts ADATA XPG Lancer Blade DDR5-6000 2x16GB, and the two are level on true latency at 10.00 ns. What that separation buys is a lower price, not a quicker kit — nothing on this page says it will feel any different in use.