Solidigm P44 Pro 1TB vs TeamGroup MP44 1TB
At least one of these has no price the site currently tracks, so what follows weighs specifications alone.
| Specification | SolidigmP44 Pro 1TB | TeamGroupMP44 1TB |
|---|---|---|
| Capacity (GB) | 1000 | 1000 |
| Sequential read (MB/s) | 7000 | 7000 |
| Sequential write (MB/s) | 6500better | 6000 |
| Current best price | — | 167,43 €at Amazon.de · captured 2026-09-13 |
| Price per TB | — | 167,43 € |
| Endurance (TBW) | 750better | 500 |
| Warranty (years) | 5 | 5 |
| DRAM cache | Yes | No |
| NAND type | tlc | — |
| Controller | SK hynix Aries (ACNS075) | — |
How these two compare
Sequential throughput
Solidigm P44 Pro 1TB states 7000 MB/s read and 6500 MB/s write; TeamGroup MP44 1TB states 7000 MB/s read and 6000 MB/s write, both over PCIe. Sequential numbers like these describe large sustained transfers; the responsiveness you notice day to day tracks random access more closely than the peak figures do.
Endurance
Solidigm P44 Pro 1TB is rated for 750 TBW and TeamGroup MP44 1TB for 500 TBW — the total the maker warrants you can write over the drive's life. A typical desktop writes only a few terabytes a year, so either rating is many years of headroom; the figure matters mainly as a relative signal of how hard each is built to be driven.
DRAM cache
On the cache question: Solidigm P44 Pro 1TB carries a DRAM cache, and TeamGroup MP44 1TB is DRAM-less. The DRAM keeps the flash-translation table close, sparing a lookup on nearly every access; a drive without it leans on host memory or its own flash, which usually shows as slower sustained random writes rather than in the headline sequential numbers.
NAND, controller and warranty
On the flash itself: Solidigm P44 Pro 1TB uses TLC, and TeamGroup MP44 1TB's NAND is not stated. NAND tiers count bits per cell — more bits pack more capacity into the same silicon but shorten write endurance and slow sustained writes, which is why QLC sits below TLC on lasting performance even when the sequential numbers match. Controller: Solidigm P44 Pro 1TB uses the SK hynix Aries (ACNS075) and TeamGroup MP44 1TB's controller is not stated. The controller runs wear-levelling, error correction and the mapping table, so it shapes sustained and random behaviour as much as the flash does — though the model name alone predicts little without testing. Solidigm P44 Pro 1TB carries a 5-year warranty and TeamGroup MP44 1TB carries a 5-year warranty — the length the maker will stand behind the drive, and usually a proxy for the endurance it is rated to.
Which to buy
The site holds no current price for at least one of these, so it cannot call the buy on cost. Judge them on the specifications above — at the same capacity and interface, two drives usually part on things like the DRAM cache, the NAND tier, endurance and warranty, so weigh whichever of those the sections above report.
Common questions about this pair
- Which is faster, Solidigm P44 Pro 1TB or TeamGroup MP44 1TB?
- Solidigm P44 Pro 1TB states 7000 MB/s read and 6500 MB/s write; TeamGroup MP44 1TB states 7000 MB/s read and 6000 MB/s write, both over PCIe. Sequential numbers like these describe large sustained transfers; the responsiveness you notice day to day tracks random access more closely than the peak figures do.
- Should you buy Solidigm P44 Pro 1TB or TeamGroup MP44 1TB?
- The site holds no current price for at least one of these, so it cannot call the buy on cost. Judge them on the specifications above — at the same capacity and interface, two drives usually part on things like the DRAM cache, the NAND tier, endurance and warranty, so weigh whichever of those the sections above report.