Kingston FURY Beast DDR5-5600 1x32GB vs TeamGroup Elite DDR5-6400 2x16GB
On true latency Kingston FURY Beast DDR5-5600 1x32GB comes out ahead: 14.29 ns, where TeamGroup Elite DDR5-6400 2x16GB takes 16.25 ns. At least one of the two has no tracked price right now, so what follows compares specifications rather than cost.
| Specification | KingstonFURY Beast DDR5-5600 1x32GB | TeamGroupElite DDR5-6400 2x16GB |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 5600 | 6400better |
| 40 | 52 | |
| True latency (ns) | 14.29better | 16.25 |
| Current best price | — | 651,63 €at Amazon.es · captured 2026-09-13 |
| Price per GB | — | 20,36 € |
No tracked price for Kingston FURY Beast DDR5-5600 1x32GB at the moment. Nothing has been captured for it that this page will stand behind, so its price cells stay empty rather than carrying a stale figure.
Kingston FURY Beast DDR5-5600 1x32GB vs TeamGroup Elite DDR5-6400 2x16GB in detail
True latency
Kingston FURY Beast DDR5-5600 1x32GB is the lower-latency kit at 14.29 ns against 16.25 ns for TeamGroup Elite DDR5-6400 2x16GB, 1.96 ns between them. That is the figure that reconciles the two spec sheets: a CAS number counts cycles, and cycles mean nothing apart from the rate they are counted at. Kingston FURY Beast DDR5-5600 1x32GB runs 5600 MT/s at CL40; TeamGroup Elite DDR5-6400 2x16GB runs 6400 MT/s at CL52.
Transfer rate
TeamGroup Elite DDR5-6400 2x16GB carries the higher rating, 6400 MT/s to 5600 MT/s for Kingston FURY Beast DDR5-5600 1x32GB — 51200 MB/s per module against 44800 MB/s. That is peak transfer rate, not access time: a higher clock is reached by counting more cycles for each access, which is why the CAS numbers differ too and why the true latency above is the directly comparable figure.
Kit layout
Kingston FURY Beast DDR5-5600 1x32GB ships as 2 × 16GB and TeamGroup Elite DDR5-6400 2x16GB ships as 2 × 16GB — the same number of sticks on both sides, so they populate a board's slots the same way.
Voltage
Kingston FURY Beast DDR5-5600 1x32GB is specified at 1.25 V and TeamGroup Elite DDR5-6400 2x16GB at 1.1 V. That is the supply each kit's published profile requests from the board.
Lighting and timings
On lighting: Kingston FURY Beast DDR5-5600 1x32GB is published with no RGB lighting, and TeamGroup Elite DDR5-6400 2x16GB is published with no RGB lighting. On the full timing tuple — the numbers after CAS — Kingston FURY Beast DDR5-5600 1x32GB is 40-40-40, and TeamGroup Elite DDR5-6400 2x16GB publishes none.
Which to buy
At least one of these kits has no tracked price right now, so this page has no buying answer to give: which is worth more depends on what each costs, and that is exactly what is missing. On specifications alone, Kingston FURY Beast DDR5-5600 1x32GB has the lower true latency at 14.29 ns.
Common questions about this pair
- Is Kingston FURY Beast DDR5-5600 1x32GB faster than TeamGroup Elite DDR5-6400 2x16GB?
- Yes, on true latency: 14.29 ns for Kingston FURY Beast DDR5-5600 1x32GB against 16.25 ns for TeamGroup Elite DDR5-6400 2x16GB. Kingston FURY Beast DDR5-5600 1x32GB runs 5600 MT/s at CL40 and TeamGroup Elite DDR5-6400 2x16GB runs 6400 MT/s at CL52, and the CAS numbers alone will not settle it — they count clock cycles, not time.
- Which of these two should I buy?
- At least one of these kits has no tracked price right now, so this page has no buying answer to give: which is worth more depends on what each costs, and that is exactly what is missing. On specifications alone, Kingston FURY Beast DDR5-5600 1x32GB has the lower true latency at 14.29 ns.