G.Skill Ripjaws S5 DDR5-6000 2x16GB vs Kingston FURY Beast DDR5-6000 1x32GB CL30
G.Skill Ripjaws S5 DDR5-6000 2x16GB and Kingston FURY Beast DDR5-6000 1x32GB CL30 arrive at the same true latency, 10.00 ns apiece. No current price is tracked for at least one of the two, so the comparison below is of specifications rather than cost.
| Specification | G.SKILLRipjaws S5 DDR5-6000 2x16GB | KingstonFURY Beast DDR5-6000 1x32GB CL30 |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 6000 | 6000 |
| 30 | 30 | |
| True latency (ns) | 10.00 | 10.00 |
| Current best price | — | — |
| Price per GB | — | — |
Neither kit has a tracked price at the moment. Nothing has been captured that this page will stand behind, so the price rows stay empty rather than carrying a stale figure.
G.Skill Ripjaws S5 DDR5-6000 2x16GB vs Kingston FURY Beast DDR5-6000 1x32GB CL30 in detail
True latency
Both kits land on 10.00 ns. Neither spec sheet differs from the other on the two figures that decide it — 6000 MT/s at CL30 on each side — so the reconciled result is identical rather than merely close.
Transfer rate
Both kits are rated 6000 MT/s, which is 48000 MB/s per module, and both are published at CL30. Those are the two figures the true latency above is computed from, so it comes out the same for each.
Kit layout
G.Skill Ripjaws S5 DDR5-6000 2x16GB ships as 2 × 16GB and Kingston FURY Beast DDR5-6000 1x32GB CL30 ships as 2 × 16GB — the same number of sticks on both sides, so they populate a board's slots the same way.
Voltage
G.Skill Ripjaws S5 DDR5-6000 2x16GB is specified at 1.35 V and Kingston FURY Beast DDR5-6000 1x32GB CL30 at 1.4 V. That is the supply each kit's published profile requests from the board.
Lighting and timings
On lighting: G.Skill Ripjaws S5 DDR5-6000 2x16GB is published with no RGB lighting, and Kingston FURY Beast DDR5-6000 1x32GB CL30 is published with no RGB lighting. On the full timing tuple — the numbers after CAS — G.Skill Ripjaws S5 DDR5-6000 2x16GB is 30-40-40-96, and Kingston FURY Beast DDR5-6000 1x32GB CL30 is 30-36-36.
Which to buy
No buying answer is possible while at least one of the two has no tracked price. The specifications do not decide it either — both land on 10.00 ns of true latency — so the choice rests on what the sections above show.
Common questions about this pair
- Is G.Skill Ripjaws S5 DDR5-6000 2x16GB faster than Kingston FURY Beast DDR5-6000 1x32GB CL30?
- Neither is. Both work out at 10.00 ns of true latency — G.Skill Ripjaws S5 DDR5-6000 2x16GB runs 6000 MT/s at CL30, Kingston FURY Beast DDR5-6000 1x32GB CL30 runs 6000 MT/s at CL30, and those two land in the same place.
- Which of these two should I buy?
- No buying answer is possible while at least one of the two has no tracked price. The specifications do not decide it either — both land on 10.00 ns of true latency — so the choice rests on what the sections above show.