Kingston FURY Renegade RGB DDR5-6000 2x16GB vs Lexar THOR Z RGB DDR5-6000 2x16GB CL32
Kingston FURY Renegade RGB DDR5-6000 2x16GB and Lexar THOR Z RGB DDR5-6000 2x16GB CL32 arrive at the same true latency, 10.67 ns apiece. No current price is tracked for at least one of the two, so the comparison below is of specifications rather than cost.
| Specification | KingstonFURY Renegade RGB DDR5-6000 2x16GB | LexarTHOR Z RGB DDR5-6000 2x16GB CL32 |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 6000 | 6000 |
| 32 | 32 | |
| True latency (ns) | 10.67 | 10.67 |
| Current best price | — | — |
| Price per GB | — | — |
Neither kit has a tracked price at the moment. Nothing has been captured that this page will stand behind, so the price rows stay empty rather than carrying a stale figure.
Kingston FURY Renegade RGB DDR5-6000 2x16GB vs Lexar THOR Z RGB DDR5-6000 2x16GB CL32 in detail
True latency
Both kits land on 10.67 ns. Neither spec sheet differs from the other on the two figures that decide it — 6000 MT/s at CL32 on each side — so the reconciled result is identical rather than merely close.
Transfer rate
Both kits are rated 6000 MT/s, which is 48000 MB/s per module, and both are published at CL32. Those are the two figures the true latency above is computed from, so it comes out the same for each.
Kit layout
Kingston FURY Renegade RGB DDR5-6000 2x16GB ships as 2 × 16GB and Lexar THOR Z RGB DDR5-6000 2x16GB CL32 ships as 2 × 16GB — the same number of sticks on both sides, so they populate a board's slots the same way.
Lighting and timings
On lighting: Kingston FURY Renegade RGB DDR5-6000 2x16GB has RGB lighting, and Lexar THOR Z RGB DDR5-6000 2x16GB CL32 has RGB lighting. On the full timing tuple — the numbers after CAS — Kingston FURY Renegade RGB DDR5-6000 2x16GB publishes none, and Lexar THOR Z RGB DDR5-6000 2x16GB CL32 is 32-38-38-96.
Which to buy
At least one of these kits has no tracked price right now, so this page has no buying answer to give — and the specifications do not break the tie either: both arrive at 10.67 ns of true latency. What is left to choose on is above.
Common questions about this pair
- Is Kingston FURY Renegade RGB DDR5-6000 2x16GB faster than Lexar THOR Z RGB DDR5-6000 2x16GB CL32?
- Neither is. Both work out at 10.67 ns of true latency — Kingston FURY Renegade RGB DDR5-6000 2x16GB runs 6000 MT/s at CL32, Lexar THOR Z RGB DDR5-6000 2x16GB CL32 runs 6000 MT/s at CL32, and those two land in the same place.
- Which of these two should I buy?
- At least one of these kits has no tracked price right now, so this page has no buying answer to give — and the specifications do not break the tie either: both arrive at 10.67 ns of true latency. What is left to choose on is above.