ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB vs KLEVV FIT V DDR5-6000 2x16GB
ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB and KLEVV FIT V DDR5-6000 2x16GB arrive at the same true latency, 10.00 ns apiece. No current price is tracked for at least one of the two, so the comparison below is of specifications rather than cost.
| Specification | ADATAXPG Lancer Blade RGB DDR5-6400 2x16GB | KLEVVFIT V DDR5-6000 2x16GB |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 6400better | 6000 |
| 32 | 30 | |
| True latency (ns) | 10.00 | 10.00 |
| Current best price | — | — |
| Price per GB | — | — |
Neither kit has a tracked price at the moment. Nothing has been captured that this page will stand behind, so the price rows stay empty rather than carrying a stale figure.
ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB vs KLEVV FIT V DDR5-6000 2x16GB in detail
True latency
Both kits land on 10.00 ns by different routes: ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB at 6400 MT/s at CL32, KLEVV FIT V DDR5-6000 2x16GB at 6000 MT/s at CL30. A CAS number counts cycles rather than time, so a higher clock absorbs a looser one and the two arrive together — which is why these spec sheets look different and the memory does not.
Transfer rate
ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB is rated 6400 MT/s against 6000 MT/s for KLEVV FIT V DDR5-6000 2x16GB — 51200 MB/s per module, against 48000 MB/s. That is peak transfer rate, not access time: reaching a higher clock costs more cycles on each access, which is why the CAS numbers differ too, and why the true latency above is the figure that compares directly.
Kit layout
ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB ships as 2 × 16GB and KLEVV FIT V DDR5-6000 2x16GB ships as 2 × 16GB — the same number of sticks either way, so both populate a board's slots identically.
Voltage
ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB is specified at 1.4 V and KLEVV FIT V DDR5-6000 2x16GB at 1.35 V. That is the supply each kit's published profile asks the board for.
Lighting and timings
On the lighting question: ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB is published with RGB lighting, and KLEVV FIT V DDR5-6000 2x16GB does not have RGB lighting. On the full timing tuple, the numbers that follow CAS: ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB runs 32-39-39, and KLEVV FIT V DDR5-6000 2x16GB runs 30-36-36-76.
Which to buy
The site holds no current price for at least one of these, so there is no buying answer here; the specifications do not settle it either, since both reconcile to 10.00 ns of true latency. The sections above are what is left to choose on.
Common questions about this pair
- Is ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB faster than KLEVV FIT V DDR5-6000 2x16GB?
- Neither. Both come out at 10.00 ns of true latency: ADATA XPG Lancer Blade RGB DDR5-6400 2x16GB runs 6400 MT/s at CL32 and KLEVV FIT V DDR5-6000 2x16GB runs 6000 MT/s at CL30, and the two reconcile to one figure.
- Which of these two should I buy?
- The site holds no current price for at least one of these, so there is no buying answer here; the specifications do not settle it either, since both reconcile to 10.00 ns of true latency. The sections above are what is left to choose on.