Skip to main content
Montech

Montech TITAN PLA Spec and Price in Germany

80 Plus Platinum850WATX

Montech is a young Taiwanese brand and TITAN PLA is its platinum line: ATX 3.1 and PCIe 5.1 with a native 12V-2x6 cable, a 135mm fluid-dynamic-bearing fan that stays off between roughly 15 and 20% load, and a 160mm chassis. Four wattages run 750W to 1200W. The ten-year warranty is the headline — it matches what the established brands offer at this tier, which is most of the argument for buying one.

Current best price
137,46 €Price too old to confirm

Prices include VAT.

The last tracked price for the 1200W Montech TITAN PLA in Germany was 137,46 € at Amazon.de, captured 2026-09-14. Across one tracked merchant and 50 days of recorded prices, the 90-day median for the 1200W Montech TITAN PLA is 136,23 € and the lowest recorded price is 134,99 €. This site began capturing prices on July 30, 2026; for Amazon listings, prices dated earlier come from Keepa's price history.

Captured periodically and may have changed.

Price history

  • 1200W
May 21, 202616 data pointstoday · 137,46 €

Each point is one day's recorded price, not a list price. Points dated before July 30, 2026, when this site began capturing prices, come from Keepa's Amazon price history. How we track prices

Specifications

Wattage
Efficiency
80 Plus Platinum
Form factor
ATX
Modular
Fully modular
ATX version
3.1
Fan size
135 mm
Length
160 mm
Zero-RPM mode
Yes
Warranty
10 years

Wattages

ConfigurationPart numberCurrent best price
750W——
850W——
1000W——
1200W—

137,46 €

Price too old to confirm

What owners and reviewers say

Summarised from 2 source(s), reviewed September 14, 2026. A source is counted only where it names this model exactly. How we track prices

Commonly praised

  • Reviewers found it built on a Seasonic platform with genuine Platinum efficiency, outstanding voltage regulation and excellent ripple suppression, backed by a ten-year warranty.
  • Independent load testing recorded full power at 47C with low average noise and strong efficiency at light loads, with a native 600W 12+4-pin connector and ATX 3.1 and PCIe 5.1 compliance.

Commonly criticised

  • It is costly at its full retail price.
  • Independent testing called its overall performance uncompetitive for the platform, with protection features needing adjustment, a low-performance APFC converter, higher inrush current and vampire power, and 3.3V only just passing the ATX v3.1 transient tests.

Guides for this category

Sources

Every spec above was pulled from one of these — a field a source didn't state was left off rather than estimated.