Thermaltake Toughpower GF3 Spec and Price in Spain
The GF3 is Thermaltake's broadest gold line, running from 750W all the way to 1650W on one platform, so it covers builds most series stop short of. Every unit is fully modular with a native 12+4-pin connector rated to 600W, ATX 3.0 compliant with 2x total and 3x GPU power excursion headroom, and cooled by a 135mm fluid-dynamic-bearing fan that stays stopped below 30% load. Ripple stays under 30mV and regulation within 2%. Ten years of warranty across the range.
Prices include VAT.
The last tracked price for the 1000W Thermaltake Toughpower GF3 in Spain was 131,82 € at Amazon.es, captured 2026-10-12. Across one tracked merchant and 148 days of recorded prices, the 90-day median for the 1000W Thermaltake Toughpower GF3 is 169,19 € and the lowest recorded price is 109,90 €. This site began capturing prices on July 30, 2026; for Amazon listings, prices dated earlier come from Keepa's price history.
Captured periodically and may have changed.
- 1000W
- 1200W
- 1350W
Each point is one day's recorded price, not a list price. Points dated before July 30, 2026, when this site began capturing prices, come from Keepa's Amazon price history. How we track prices
Specifications
- Wattage
- Efficiency
- 80 Plus Gold
- Form factor
- ATX
- Modular
- Fully modular
- ATX version
- 3.0
- Fan size
- 135 mm
- Zero-RPM mode
- Yes
- Warranty
- 10 years
Wattages
| Configuration | Part number | Current best price |
|---|---|---|
| 750W | — | — |
| 850W | — | — |
| 1000W | PS-TPD-1000FNFAGx-4 | 131,82 € Price too old to confirm |
| 1200W | — | 238,55 € Price too old to confirm |
| 1350W | — | 191,19 € Price too old to confirm |
| 1650W | — | — |
What owners and reviewers say
Summarised from 1 source(s), reviewed September 13, 2026. A source is counted only where it names this model exactly. How we track prices
Commonly praised
- Delivers full power at high temperature, ready for the latest standards with a native high-power connector.
- Quiet up to moderate loads with high build quality and correctly set protections.
- Load regulation within one percent, good ripple suppression, long hold-up time and low inrush current.
Commonly criticised
- Efficiency needs a boost under normal loads and transient response could be better.
- Noisy at high loads, with only two piggy-tail graphics cables and high protection thresholds on the minor rails.
Sources behind this summary
Guides for this category
Sources
Every spec above was pulled from one of these — a field a source didn't state was left off rather than estimated.