ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 vs Kingston FURY Beast DDR5-6000 1x16GB CL30
ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 and Kingston FURY Beast DDR5-6000 1x16GB CL30 arrive at the same true latency, 10.00 ns apiece. Kingston FURY Beast DDR5-6000 1x16GB CL30 is the cheaper of the two at the prices tracked here, so what separates them is cost and not speed.
| Specification | ADATAXPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 | KingstonFURY Beast DDR5-6000 1x16GB CL30 |
|---|---|---|
| Capacity (GB) | 16 | 16 |
| Speed (MT/s) | 6400better | 6000 |
| 32 | 30 | |
| True latency (ns) | 10.00 | 10.00 |
| Current best price | 433,70 €at Amazon.fr · captured 2026-09-12 | 293,76 €betterat Amazon.fr · captured 2026-09-13 |
| Price per GB | 27,11 € | 18,36 €better |
ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 vs Kingston FURY Beast DDR5-6000 1x16GB CL30 in detail
True latency
Both kits land on 10.00 ns by different routes: ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 at 6400 MT/s at CL32, Kingston FURY Beast DDR5-6000 1x16GB CL30 at 6000 MT/s at CL30. A CAS number counts cycles rather than time, so a higher clock absorbs a looser one and the two arrive together — which is why these spec sheets look different and the memory does not.
Transfer rate
ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 is rated 6400 MT/s against 6000 MT/s for Kingston FURY Beast DDR5-6000 1x16GB CL30 — 51200 MB/s per module, against 48000 MB/s. That is peak transfer rate, not access time: reaching a higher clock costs more cycles on each access, which is why the CAS numbers differ too, and why the true latency above is the figure that compares directly.
Price and tracked history
ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 is tracked at 433,70 € — 27,11 € per gigabyte — and Kingston FURY Beast DDR5-6000 1x16GB CL30 at 293,76 €, or 18,36 €. Both are 16GB kits, so the totals compare directly: Kingston FURY Beast DDR5-6000 1x16GB CL30 is 139,94 € less than ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32. At 433,70 €, ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 is running 22% below its own 90-day median. At 293,76 €, Kingston FURY Beast DDR5-6000 1x16GB CL30 is running 0% below its own 90-day median.
Kit layout
ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 ships as 2 × 8GB and Kingston FURY Beast DDR5-6000 1x16GB CL30 ships as 2 × 8GB — the same number of sticks either way, so both populate a board's slots identically.
Lighting
On the lighting question: ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 does not have RGB lighting, and Kingston FURY Beast DDR5-6000 1x16GB CL30 does not have RGB lighting.
Which to buy
At the prices tracked here Kingston FURY Beast DDR5-6000 1x16GB CL30 undercuts ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32, and the two are level on true latency at 10.00 ns. What that separation buys is a lower price, not a quicker kit — nothing on this page says it will feel any different in use.
Common questions about this pair
- Is ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 faster than Kingston FURY Beast DDR5-6000 1x16GB CL30?
- Neither. Both come out at 10.00 ns of true latency: ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32 runs 6400 MT/s at CL32 and Kingston FURY Beast DDR5-6000 1x16GB CL30 runs 6000 MT/s at CL30, and the two reconcile to one figure.
- Which one costs less?
- Kingston FURY Beast DDR5-6000 1x16GB CL30, at 293,76 € against 433,70 € — 139,94 € apart at the same 16GB.
- Which of these two should I buy?
- At the prices tracked here Kingston FURY Beast DDR5-6000 1x16GB CL30 undercuts ADATA XPG Lancer Blade DDR5-6000 1x16GB 6400 CL32, and the two are level on true latency at 10.00 ns. What that separation buys is a lower price, not a quicker kit — nothing on this page says it will feel any different in use.