ASUS ROG Strix Platinum Spec and Price in Italy
ROG Strix Platinum is the plainer half of ASUS's enthusiast pair: no OLED panel and no Aura lighting, just an 80 PLUS Platinum unit built to ATX 3.1 with a native 16-pin PCIe 5.1 cable that is 16-pin at both ends. GaN MOSFETs on the primary side cut switching losses, and the 135mm dual-ball-bearing fan stays still until load passes 40%, which is how the 1000W earns its Cybenetics Lambda A+ noise grade. Fully modular on etched cables, and ASUS backs both the 1000W and the 1200W for ten years.
Prices include VAT.
The last tracked price for the 1000W ASUS ROG Strix Platinum in Italy was 332,68 € at Amazon.it, captured 2026-09-27. Across one tracked merchant and 8 days of recorded prices, the 90-day median for the 1000W ASUS ROG Strix Platinum is 392,72 € and the lowest recorded price is 326,79 €. This site began capturing prices on July 30, 2026; for Amazon listings, prices dated earlier come from Keepa's price history.
Captured periodically and may have changed.
- 1000W
- 1200W
Each point is one day's recorded price, not a list price. Points dated before July 30, 2026, when this site began capturing prices, come from Keepa's Amazon price history. How we track prices
Specifications
- Wattage
- Efficiency
- 80 Plus Platinum
- Form factor
- ATX
- Modular
- Fully modular
- ATX version
- 3.1
- Fan size
- 135 mm
- Zero-RPM mode
- Yes
- 12V-2x6 connectors
- 1
- PCIe 8-pin
- 4
- SATA connectors
- 6
- Warranty
- 10 years
Wattages
| Configuration | Part number | Current best price |
|---|---|---|
| 1000W | — | 332,68 € Price too old to confirm |
| 1200W | — | 385,83 € Price too old to confirm |
What owners and reviewers say
Summarised from 1 source(s), reviewed September 14, 2026. A source is counted only where it names this model exactly. How we track prices
Commonly praised
- Reviewers found high build quality, efficient operation, low overall noise, and good 12V transient response, with a 600W 12V-2x6 connector and fully modular cables.
- It is ATX 3.1 and PCIe 5.1 ready and uses GaN MODFETs on the primary side.
Commonly criticised
- The reviewer said the GaN MODFETs bring no real benefit because the design lacks a totem-pole PFC converter.
- The double-ball-bearing fan produced noticeable bearing noise at low speeds.
- It has extremely high inrush currents and loose 3.3V load regulation, and the minor-rail OCP points do not tighten when hot.
Sources behind this summary
Guides for this category
Sources
Every spec above was pulled from one of these — a field a source didn't state was left off rather than estimated.