Montech
Montech TITAN PLA Spec and Price in Italy
80 Plus Platinum850WATX
Montech is a young Taiwanese brand and TITAN PLA is its platinum line: ATX 3.1 and PCIe 5.1 with a native 12V-2x6 cable, a 135mm fluid-dynamic-bearing fan that stays off between roughly 15 and 20% load, and a 160mm chassis. Four wattages run 750W to 1200W. The ten-year warranty is the headline — it matches what the established brands offer at this tier, which is most of the argument for buying one.
Current best price
No tracked price — this page compares specifications alone.
Specifications
- Wattage
- Efficiency
- 80 Plus Platinum
- Form factor
- ATX
- Modular
- Fully modular
- ATX version
- 3.1
- Fan size
- 135 mm
- Length
- 160 mm
- Zero-RPM mode
- Yes
- Warranty
- 10 years
Wattages
| Configuration | Part number |
|---|---|
| 750W | — |
| 850W | — |
| 1000W | — |
| 1200W | — |
Guides for this category
What owners and reviewers say
Summarised from 2 source(s), reviewed September 14, 2026. A source is counted only where it names this model exactly. How we track prices
Commonly praised
- Reviewers found it built on a Seasonic platform with genuine Platinum efficiency, outstanding voltage regulation and excellent ripple suppression, backed by a ten-year warranty.
- Independent load testing recorded full power at 47C with low average noise and strong efficiency at light loads, with a native 600W 12+4-pin connector and ATX 3.1 and PCIe 5.1 compliance.
Commonly criticised
- It is costly at its full retail price.
- Independent testing called its overall performance uncompetitive for the platform, with protection features needing adjustment, a low-performance APFC converter, higher inrush current and vampire power, and 3.3V only just passing the ATX v3.1 transient tests.
Sources behind this summary
Sources
Every spec above was pulled from one of these — a field a source didn't state was left off rather than estimated.