KingSpec

KingSpec P3 Spec and Price in Italy

SATA512GB2.5-inch580 MB/s read

Bare-bones is the operative description for KingSpec's P3: a 512GB 2.5-inch SATA drive rated at 580/570 MB/s, a three-year warranty, and no published controller or NAND figures — only per-capacity TBW ratings. It reads as a generic-market bargain SSD aimed squarely at replacing an aging hard drive for basic boot and load-time improvements, not a drive to build a performance system around. Buyers should expect it to compete on price rather than on any documented technical differentiator.

86th of 106 models in the SSD catalog on Sequential read.

Current best price

No tracked price — this page compares specifications alone.

Specifications

Capacity
512GB
Interface
SATA
Sequential read
580 MB/s
Sequential write
570 MB/s
Form factor
2.5-inch
Endurance (TBW)
120 TB
Warranty
3 years

Capacities

ConfigurationPart numberEndurance (TBW)Sequential writeSequential read
128GB30 TB570 MB/s580 MB/s
256GB60 TB570 MB/s580 MB/s
512GB120 TB570 MB/s580 MB/s
1TB240 TB570 MB/s580 MB/s
2TB480 TB570 MB/s580 MB/s
4TB960 TB570 MB/s580 MB/s
8TB1920 TB570 MB/s580 MB/s

Guides for this category

What owners and reviewers say

Summarised from 1 source(s), reviewed September 14, 2026. A source is counted only where it names this model exactly. How we track prices

Commonly praised

  • Reviewers found it a low-cost SATA drive that reaches the interface's sequential limits.
  • It carries a three-year warranty and a sizeable pSLC cache.

Commonly criticised

  • It uses QLC NAND, and sustained write speed falls to hard-drive-like levels once the cache fills.
  • Its benchmark score was among the lowest of the drives tested.

Sources behind this summary

Sources

Every spec above was pulled from one of these — a field a source didn't state was left off rather than estimated.