A-Tech
A-Tech 8GB DDR4-2400 UDIMM Spec and Price in the United States
DDR48GB (1x8GB)UDIMM14.17 ns true latency
$75.00 MSRP
A single 8GB module rather than a matched pair, running DDR4 at 2400 MT/s and 1.2V — the oldest and slowest of A-Tech's three kits here. At $75 it reads as a capacity-only upgrade for an existing system with an open slot, not a performance part or a kit meant to run in dual-channel from the box. Fits budget repairs and older platforms needing a single-stick top-up.
Tied 138th of 139 models in the RAM catalog on Speed — 2 models share this figure.
Current best price
No tracked price — this page compares specifications alone.
Specifications
- Capacity
- 8GB (1x8GB)
- True latency
- 14.17 ns
- Memory type
- DDR4
- Speed
- 2400 MT/s
- CAS latency
- Form factor
- UDIMM
- Voltage
- 1.2 V
- Modules
- 1
- RGB
- No
- ECC support
- No
Capacities
| Configuration | Part number |
|---|---|
| 4GB (1x4GB) | — |
| 8GB (1x8GB) | — |
| 16GB Kit (2x8GB) | — |
| 32GB Kit (4x8GB) | — |
Guides for this category
How much RAM you actually needHow to size memory from the pressure your machine is under now, why running short quietly costs speed, and when a matched pair beats one stick.RAM speed and latency, and when they matterWhat a kit's MT/s and CAS latency each measure, why true latency is the two together, and the machines where the numbers actually change anything.SO-DIMM vs DIMM: the memory a laptop takesWhy laptop memory is a different module from desktop memory, how DDR4 and DDR5 are keyed apart, and why some machines take no module at all.What is ECC memory, and when you need itWhat error-correcting memory actually catches, how registered and load-reduced modules differ from unbuffered ones, and why the platform decides.
Sources
Every spec above was pulled from one of these — a field a source didn't state was left off rather than estimated.