Kingston FURY Beast DDR5-6000 1x32GB CL30 vs Lexar THOR Z RGB DDR5-6000 2x16GB
Kingston FURY Beast DDR5-6000 1x32GB CL30 has the lower true latency of the two at 10.00 ns, against 12.67 ns for Lexar THOR Z RGB DDR5-6000 2x16GB. No current price is tracked for at least one of the two, so the comparison below is of specifications rather than cost.
| Specification | KingstonFURY Beast DDR5-6000 1x32GB CL30 | LexarTHOR Z RGB DDR5-6000 2x16GB |
|---|---|---|
| Capacity (GB) | 32 | 32 |
| Speed (MT/s) | 6000 | 6000 |
| 30 | 38 | |
| True latency (ns) | 10.00better | 12.67 |
| Current best price | 603,51 €at Amazon.fr · captured 2026-09-13 | — |
| Price per GB | 18,86 € | — |
No tracked price for Lexar THOR Z RGB DDR5-6000 2x16GB at the moment. Nothing has been captured for it that this page will stand behind, so its price cells stay empty rather than carrying a stale figure.
Kingston FURY Beast DDR5-6000 1x32GB CL30 vs Lexar THOR Z RGB DDR5-6000 2x16GB in detail
True latency
Kingston FURY Beast DDR5-6000 1x32GB CL30 is the lower-latency kit at 10.00 ns, against 12.67 ns for Lexar THOR Z RGB DDR5-6000 2x16GB — a difference of 2.67 ns. That figure is what reconciles the two spec sheets: CAS latency counts clock cycles, so it only means something next to the clock it counts. Kingston FURY Beast DDR5-6000 1x32GB CL30 runs 6000 MT/s at CL30; Lexar THOR Z RGB DDR5-6000 2x16GB runs 6000 MT/s at CL38.
Transfer rate
Both kits are rated 6000 MT/s, which is 48000 MB/s per module. Their spec sheets part company on CAS latency rather than on clock, so the true-latency figures above are what separates them.
Kit layout
Kingston FURY Beast DDR5-6000 1x32GB CL30 ships as 2 × 16GB and Lexar THOR Z RGB DDR5-6000 2x16GB ships as 2 × 16GB — the same number of sticks either way, so both populate a board's slots identically.
Voltage
Kingston FURY Beast DDR5-6000 1x32GB CL30 is specified at 1.4 V and Lexar THOR Z RGB DDR5-6000 2x16GB at 1.35 V. That is the supply each kit's published profile asks the board for.
Lighting and timings
On the lighting question: Kingston FURY Beast DDR5-6000 1x32GB CL30 does not have RGB lighting, and Lexar THOR Z RGB DDR5-6000 2x16GB is published with RGB lighting. On the full timing tuple, the numbers that follow CAS: Kingston FURY Beast DDR5-6000 1x32GB CL30 runs 30-36-36, and Lexar THOR Z RGB DDR5-6000 2x16GB runs 38-48-48-96.
Which to buy
Without a tracked price for both, this page cannot say which to buy — the answer depends on cost, and cost is what is absent. What the specifications do say is that Kingston FURY Beast DDR5-6000 1x32GB CL30 has the lower true latency, 10.00 ns.
Common questions about this pair
- Is Kingston FURY Beast DDR5-6000 1x32GB CL30 faster than Lexar THOR Z RGB DDR5-6000 2x16GB?
- Kingston FURY Beast DDR5-6000 1x32GB CL30 is, on true latency: 10.00 ns against 12.67 ns. Kingston FURY Beast DDR5-6000 1x32GB CL30 runs 6000 MT/s at CL30 and Lexar THOR Z RGB DDR5-6000 2x16GB runs 6000 MT/s at CL38; the CAS numbers alone do not settle it, because they count clock cycles rather than time.
- Which of these two should I buy?
- Without a tracked price for both, this page cannot say which to buy — the answer depends on cost, and cost is what is absent. What the specifications do say is that Kingston FURY Beast DDR5-6000 1x32GB CL30 has the lower true latency, 10.00 ns.